标签存档： 新西兰代写论文

新西兰唐道克理工学院论文代写：结构设计师

在： , , ,

新西兰唐道克理工学院论文代写：结构设计师

结构钢和其他金属的疲劳破坏是在单调弹性载荷作用下裂纹萌生和扩展的过程。当在一个钢结构裂纹进展可以持续足够长的时间，在钢结构失效的发生，因为非破裂区变得充分下降，不允许对结构的内力抵抗达到控制模式的裂纹。的疲劳过程可以发生在不同的应力水平，相当短的那些与钢的故障在施加负载的静态条件下。在钢中产生疲劳失效的正常条件是大量循环荷载或荷载循环的应用。因此，对结构工程中的各种易疲劳失效的一体化结构，如桥梁，跨越和堆栈等本文档提供需要建立需要理解疲劳失效的基础必要的细节、原因和需要评估这一重大问题在建筑结构和许多其他应用程序的步骤。
例如，缺陷可发生在一块钢板焊接细节疲劳在图1.2形象地说明类型。这些包括局部浸润、无合成、孔隙度等夹杂物，在焊趾削弱或微尺寸的缺陷或裂纹萌生，家周围的焊接修复或圆弧段的罢工。尽管事实上，结构设计师或那些在结构的制作费将努力减少这些畸形，然而，既不经济也不消灭它们几乎可以想象的（马多克斯1991 23-74）。

新西兰唐道克理工学院论文代写：结构设计师

Fatigue failure in structural steel and other metals is the process of initiation and propagation of cracks under the activity of monotonous elastic loads. When the crack progression in a steel structure is allowed to continue for long enough time, failure of the structural steel takes place, because the non-cracked region becomes sufficiently decreased which doesn’t permit the interior forces of the structure to resist the crack from reaching to an uncontrolled mode. The fatigue procedure can take place at various stress levels that are considerably shorter of those connected with failure of steel under static conditions of applying load. The normal condition that generates fatigue failure in steel is the application of a substantial number of cyclic loading or load cycles. As a consequence, the numerous kinds of structural engineering applications are susceptible to fatigue failures incorporate structures, for example, bridges, spans and stacks etc. This document offers the necessary details required to build the foundation needed to comprehend fatigue failures, causes involved and steps needed to evaluate this major issue in structural buildings and many other applications.
For instance, the types of defects that can take place because of fatigue in a filet-welded steel detail are illustrated pictorially in figure 1.2. These incorporate partial infiltration, absence of synthesis, porosity and other inclusions, undercut or micro-size defects at the weld toe, and incorporations or initiation of cracking around a weld repair or at circular segment strikes. Despite the fact that the designer of the structure or those in charge of the structure’s fabrication will endeavor to minimize these deformities, however, it is neither financially nor practically conceivable to eradicate them (Maddox 1991 23-74).

新西兰阿斯隆理工学院论文代写：结构安全设计

在： , ,

新西兰阿斯隆理工学院论文代写：结构安全设计

建筑物不断暴露在外部以及内部的力量，可能造成损害。为了抵御威胁的力量，结构需要设计安全，这是一个持续改进的施工技术是必要的。随着结构设计和性能的提高，居住在其中变得更安全。

地震的演变，然后达到建筑物的基础可以转化成不同形式的力量。地震力会变成拉伸，压缩，剪切，扭转力或变动量力趋向于产生结构转变的影响（adedeji，2011）。

在结构内部进化或施加在结构外的所有力中，最突出的是水平力，也就是称为由于侧向土压力而产生的剪切荷载。这些水平力往往会造成滑的建筑基础，因此结构可以滑过他们原来的位置（adedeji，2011）。

除此之外，水平力的发展，在结构上的顶层的多层建筑物的结构成员朝着底部的结构和在平面内的剪切载荷的壁的结构的最低水平上。以类似的方式，就像剪切载荷，有隆起和倾倒影响影响建筑。这些影响是起源，这些举措进一步向底部在墙角，在这个拐角点，这些力量试图提升和旋转结构的壁沿轴线，墙的下角处（adedeji，2011）。

保持这些激烈的倾覆现象的看法，它是至关重要的预铸结构构件，如木材剪力墙的设计与抗剪切的值，这是足以抵御自然/非自然应用的结构上的力量。墙的抗剪性能在避免严重的损伤和灾难中起着至关重要的作用，因为可能会对结构施加破坏和倒塌的机会。（adedeji，2011）

新西兰阿斯隆理工学院论文代写：结构安全设计

Buildings are in a constant exposure to the external as well internal forces that may cause damage. In order to stand against the threatening forces, the structures need to be designed safely and for this a continuous improvement in the construction techniques is necessary. With the advancement in the structural design and the capability, it becomes safer to inhabit in them.

The earthquake force that evolves and then reaches the foundation of building can transform into different forms of forces. The earthquake force might turn into tension, compression, shear, torsion forces or become momentum force that tends to create turning effects in the structure.(Adedeji, 2011)

Out of all the forces that evolve within the structure or are imposed on the outside of the structure, the most prominent of them is the horizontal force also known as shear loads that might get created due to the lateral earth pressure. These horizontal forces tend to cause a slip of the building foundation and hence the structures can slide past their original placement (Adedeji, 2011).

In addition to this, the horizontal forces that develop in the structural members on the top floors of a multi-storied building move towards the bottom of the structure and to the in-plane shear loads on the walls at the lowest level of the structure. In a similar way, just like the shear loads, there are uplift and toppling affects that impact the building. As these affects are originated, these move further onward towards the bottom to the corner of the wall and at this corner point, these forces try to lift and rotate the structural wall along the axis at which the lower corner of the wall lies.(Adedeji, 2011)

Keeping these drastic overturning phenomena in view, it is crucial that the pre-cast structural members such as the timber shear walls be designed with shear resistance with a value that is enough to resist against the natural/non-natural application of forces on the structure. The shear resistance of a wall plays a vital role in avoiding serious injuries and catastrophes as the chances of collapse and damage that might be imposed on the structure are mitigated. (Adedeji, 2011)

 

新西兰惠灵顿理工学院论文代写：建设预算

在： , ,

新西兰惠灵顿理工学院论文代写：建设预算

该报告详细的大学研究中心的建设进度在PG5网站。该项目包括约2500平方米的楼面空间和停车场下，混凝土框架结构、玻璃幕墙、学生工作、非正式会议和CAFé地区，研究办公室工作人员。一个工作分解结构的任务，提出了一个时间表，完成相同的。任务完成的时间进度表是基于6天工作周；从二月2015，工程预算700万美元。

位置

研究中心是邦德大学的PG5网站。在这里一楼和一楼将在现场创建。

顾客

本次作业的委托人是邦德大学。

预算

这个预算的成本控制相当严格。基线参考在初期建设计划创建和相关的现金流量估计（亨德里克森，2000）。然后根据项目设置的里程碑和客户提供的附加规范对成本估算进行了修订。为溢出缓冲区备最终的详细的成本估算。这将确保工作进度在预算内的所有时间。7million美元是最后的和总的计划预算。本预算将用于大学研究中心所需的两个建设阶段。第一阶段将包括地面工作和提高底层，第二阶段将包括一楼和其他额外的设计工作需要。所有缓冲区和更多都包括在内。

时间表

这项工作开始的时间表是二月2015的第一周。这项工作将在未来6周内完成。预计的时间表实际上是7个星期，以允许任何额外的时间缓冲区。

开始日期

2015年2月1日是正式开始日期（这是待批准的项目经理和现场施工经理）

预计完成日期

3月21日是官方完成和交接日期。我们打算在2015年3月14日前（6周）完成这项工作。

新西兰惠灵顿理工学院论文代写：建设预算

The report details the construction schedule for the University Research Hub on the PG5 site. This project comprises approximately 2,500 m2 of floor space with car parking under, concrete framed structure, glass curtain wall, student workspace, informal meeting and café areas, and research office staff. A work breakdown structure of the tasks is presented along with a time schedule to complete the same. The time schedule for task completion is based on a 6-day working week; starting February 2015.The budget for the project is $7m.

Location

A research hub is being created in Bond University on the PG5 site. Here a ground floor and the first floor will be created at site.

Client

The Client for this assignment is Bond University.

Budget

Cost control was quite strict on this budget. The baseline reference was created on the initial construction plan and the associated cash flow estimates (Hendrikson, 2000). Then the cost estimates was revised based on the milestones set for the project and the additional specifications that were provided by the client. The final detailed cost estimate was prepared with a buffer for the overruns. This will ensures that the work progresses all time within the budget. $7million was the final and total budget for the plan. This budget is to be used for the two construction phases that will be required for the University Research Hub. The first phase will include the ground work and raising the ground floor, the second phase will include the first floor and other extra design works required. All buffers and more are included.

TimeLine

The time schedule for the start of this work is the first week of February 2015. The work will be completed in the next 6 weeks following this. The projected timeline is actually 7 weeks to allow for any additional time buffers.

Start Date

February 1, 2015 is the official start date (this is pending approval from the project manager and site construction manager)

Expected Finish Date

March 21 is the official finish and handover date. We intend to complete the work by March 14, 2015 (6 weeks)。

新西兰怀卡托理工学院论文代写：结构设计

在： , ,

新西兰怀卡托理工学院论文代写：结构设计
本文关注的是建筑设计，这是在地震发生造成的损害程度中发挥作用的最重要的特征。为了改善建筑设计，有诸如交叉层压木材（CLT）和形状记忆合金（SMA）等创新产品，具有许多优点。
CLT是一个发明的木制品，它的发展发生在十一年前，但最近才在奥地利和德国初始化（Schneider等，2012）。从那时起，它在欧洲的主要吸引力来源于其在住宅和非住宅用途中的独特应用。在欧洲使用CLT作为结构部件已经证明它是一种有竞争力的产品，可以成功应用于中高度以及高层建筑。 （Popovski等人，2010）
虽然交叉层压木材在其后具有许多优点，其利用不是那么普遍，因为在英国缺乏它的使用，并且只是在最近，它进入了北美市场。然而，它在加拿大城市中心有一个更有希望的前景，正在努力创造可以被证明是可持续的结构。 （Popovski等人，2010）
在意大利的SOFIE项目下，进一步探索了这种创新结构构件的理解，以研究在地震情况下对CLT的影响。 （Ceccotti等人，2006）
研究了地震波对低，中高度结构的影响。在这个实验议程下，考虑了各种具有不同壁开口模式的CLT墙壁设计来观察不同条件下CLT墙板的个体行为。 （Popovski等人，2010）

新西兰怀卡托理工学院论文代写：结构设计

This paper focuses on the building design which is the foremost feature that plays a role in the extent of damage caused by the earthquake occurrence. In order to improve the building design, there are innovative products such as Cross-laminated timber (CLT) and Shape Memory Alloys (SMA) that have numerous pluses.
CLT is an invented wooden item with its development that took place eleven years back but got initialized in Austria and Germany only recently (Schneider et al., 2012). Since then, it has been a main source of attraction in Europe for its unique application in residential as well as non-residential purposes. The use of CLT as a structural component in Europe has proved that it is a competitive product that can be successfully applied to medium height as well as high-rise buildings. (Popovski et al., 2010)
Though Cross Laminated Timber has numerous advantages in its wake, its utilization is not that widespread as there is a lack of its use in UK and only in recent, it got the entry in the market of North America. However, it has a more promising prospect in Canadian city centres where efforts are being made to create structures that can be proved as sustainable. (Popovski et al., 2010)
Further exploration into the understanding of this innovative structural member to study the influence on CLT under earthquake circumstances has been studied to a great detail under the SOFIE project, Italy. ( Ceccotti et al., 2006)
The influence of seismic waves over the low and medium height structures was studied. Under this experimental agenda, various kinds of CLT wall designs with distinguished patterns of wall openings were considered to observe the individual behaviour of CLT wall panels under different conditions. (Popovski et al., 2010)

新西兰国立理工学院论文代写：虎步体验

在： , ,

新西兰国立理工学院论文代写：虎步体验

老虎行走的经验是给人民以695美元的速度（这将包括多达4人）。这是一个限制包，在15岁以下的儿童将不允许。在这个包中，四名成员被允许去与老虎和处理程序的老虎早上散步。这一经验提供星期日和所有工作日除星期三（虎岛，2015）。经验将持续约60分钟，一个处理程序和摄影师将陪同的人谁带来了包。他们有彩色打印，一个老虎岛纪念品书，也是一个毛绒虎玩具
顾客价值：个人而言，虎走体验是全新体验。走的是只在上午进行，这可能是一个麻烦的客人，但是作为处理解释的经验是在上午进行的因为它是更容易把老虎当有较少的游客可能会打扰虎是当在其自然栖息地（人工）。与旅游者进行的个人互动是老虎岛和梦幻世界的营销优势。该处理程序提出了细节上的老虎是孟加拉虎，被称为Sita（虎岛，2015）。除了老虎的细节处理，其亲子关系和其他细节也给出了梦境来帮助维持虎种群的努力（TripAdvisor，2013）。动物园企业在保护物种中扮演重要角色（克里斯蒂，2009）。梦幻世界中帮助游客得到更多的关于老虎和其他互动福利信息进行了工作。这是传统口碑广告的一种形式。老虎的行走体验外表绝对支持图像传播的梦境。此外，老虎走的经验也有用户百分之50天的门票。这些增值服务，提高品牌形象，通过梦境的产品包装销售的客户。照片是在一个USB可购买50美元的额外费用的形式也提供给人。

新西兰国立理工学院论文代写：虎步体验

The tiger walk experience is given to the people at a rate of 695$ (this will include up to 4 people). This is a restricted package in that children under than 15 years of age will not be allowed. In this package, four members are allowed to go on a morning stroll with the tiger and the handler for that tiger. This experience is offered on Sunday and all weekdays except Wednesday (Tiger Island, 2015). The experience would last for an approximate 60 minutes and a handler and a photographer will accompany the people who have brought the package. They are given color prints, a tiger island souvenir book and also a plush tiger toy
Value for Customers: Personally, the tiger walk experience was a completely new experience. The walk is conducted only in the morning, this could be of a inconvenience to the visitor, however as the handler explained the experience is conducted in the morning because it is easier to take out the tiger when there are lesser number of visitors who might disturb the tiger when it is outside its (artificially constructed) natural habitats. The personal interaction with the handler who was conducted the tour is a marketing advantage for Tiger Island and Dream world. The handler presented details on the tiger which was a Bengal tiger and was called Sita (Tiger Island, 2015). The handler in addition to details of the tiger, its parentage and other details also presented the efforts of Dreamworld to help sustain the tiger population (Tripadvisor, 2013). Zoo businesses play a significant role in the conservation of the species (Christie, 2009). The work of Dreamworld to help visitors get as much information about tigers and other interactional benefits were also presented. This was a form of traditional word of mouth advertising. The physical appearance of the tiger walk experience definitely supports the image propagated by Dreamworld. Additionally the tiger walk experience also avails the users a 50 percent of the day entry tickets. These are value added services to the customer which enhances the brand image of Dreamworld through the product package sold. Photos are also available to the person in the form of a USB which can be purchased for an additional cost of 50$.

新西兰怀塔科学院论文代写：评估报告

在： ,

新西兰怀塔科学院论文代写：评估报告

这份报告是关于可用性检查以及鉴定的著名的维珍航空公司的网站。评估的案例研究中,参与者进行了招聘和提供了两个用户故事的参与者相关的网站http://www.virginaustralia.com/。非常具体的启发式的选择做了包括修改web应用程序和用户可访问性(尼尔森& Molich,1990)。整个评估报告分为两个主要部分:

1、航空公司的网站http://www.virginaustralia.com/专家可用性检查
2、用户评估的各种可用性启发式的基础上
总的报告是基于两个用户的故事，第一个是关于找到最便宜的航班在澳大利亚。在整个研究中，许多潜在客户的故事说明最便宜的航班，从悉尼返回阿德莱德在接下来的一个月。航班预订了参观他们的亲戚（兰迪&梅尔斯，2001）。另一个故事是关于预订一个航班，这个故事表明预订返回航班的情况下，一个商务旅行者谁想从悉尼旅行到第二天的墨尔本。他这次来访的主要目的是参加一个重要会议.。因此，四名被招募为维珍航空公司网站的专家评估分析，使优质特色应用将被添加到用户界面的设计以及与用户界面相关的解决方案进行评估（Marcus，2002）。
评价分析：
与会者根据自己的角色与航空用户类别相关的选择。有三种主要类型的人物根据他们被选中-潜在的用户或非航空公司客户，轻型航空公司客户和重型航空客户。参与实验的用户均低于组年龄和某些分25年，像航空旅行和预订体验，与现代高科技产品线的技术技能，他们的生活方式和互联网的使用经验是评估方法考虑（魏、ozok，2005）。

新西兰怀塔科学院论文代写：评估报告

This report is about the usability inspection as well as expert evaluation of the famous airline website of Virgin. For the evaluation of a case study, recruitment of a participant has been carried out and two of the user stories have been provided to the participant which is related with the website http://www.virginaustralia.com/. Very specific selection of heuristics was done which included the modification of web application and the user accessibility (Nielsen & Molich, 1990). The entire evaluation report is categorized into two major parts:
Expert Usability Inspection of the Airline Website http://www.virginaustralia.com/
User assessment on the basis of various usability heuristics
The overall report is based on two of the users’ stories; the first one is about finding the cheapest flight in Australia. Throughout the research, the stories of many potential customers indicated about the cheapest flight while returning from Sydney to Adelaide in the following month. The booking of flight was for arranging visits to their relatives (Landay & Myers, 2001). Another story is about booking a flight and this story indicates the booking of a returning flight in case of a business traveler who wanted to travel from Sydney to Melbourne the next day. The main purpose of his visit was to attend an important meeting. Therefore, four participants were recruited for the expert evaluation analysis of the website of Virgin Airline, so that application of high-quality features will be added to the design of the user interface as well as the solutions associated with the user interface will be evaluated (Marcus , 2002).
Evaluation Analysis:
The participants were selected according to their personas related with the category of airline user. There are three major types of persona according to which they were selected- potential user or non-airline customer, Light Airline Customer and Heavy Airline Customer. The users who took part in the experiment were below 25 years age group and certain points, like- airline travel and booking experience, technological skills in line with the modern high-tech gadgets, their life styles and experience with the use of internet were taken into consideration for the evaluation method (Wei & Ozok, 2005).

新西兰基督城国际学院论文代写:法院行为

在： , ,

新西兰基督城国际学院论文代写:法院行为

法院是正义的地方，每个受害者都期待和实现他们的清白正义。澳大利亚有很多法院，并且有一定的等级制度，所有法院都必须遵守。堪培拉最高法院是澳大利亚高级法院，有许多国家和领土管辖权的法院具有独立[发现澳大利亚法，（2014）HTTP：/ / www.findlaw。com。金/常见问题/ 1187 /什么是澳大利亚不同的法院和.aspx ]。任何下级法院都需要遵循以前的法院的等级更高的层次本身，如当地法院将遵循的决定，这反过来又将最高法院的决定，高等法院。这是一个个人的意见和个人的观察文件，这是写后，参加地方和高等法院，以及提出了详细的观察，他们的行为的主题，并比较相关文献。
个人反思与观察
一个国家的法律制度是最受法院和法院。法院是国家法律体系反映和展示司法公正有效的地方.。法院和他们的决定通常形成一个国家的法律体系的形象和随后的信仰和信任的人在系统中。因此，法院有责任维护人们对一个国家法律制度的信任和信任.。澳大利亚有一个明确的法律制度，所有法院都审理各种案件.。裁判法院一般都会对刑事案件进行总结，而最重要的案件也会在澳大利亚的高级刑事法庭审理，而高等法院则是进行重大审判和决定的地方.。
我访问新南威尔士地区法院是非常令人兴奋的，在自我体验的学习超过预期。法院是一个美丽的国家设计的建筑与和平的环境。法院有一个良好的安全水平外以及内部。最近已经有更大的责任，尤其对于那些进入法院对风险管理活动[ Rick Sarre和Alikki Vernon更加注重安全，在澳大利亚法院获得安全的正义的几点思考在智能、设计和工艺（2013）国际犯罪、司法与社会民主，2（2），p.133 ]。人们穿着正式，特别是在法庭上工作的人员，除了少数人穿的休闲服装。法院有一个案件列表和各自的法院房间，案件审理。法官的名字也被提及。工作人员用正式的方式说话，在一般聊天中没有使用不受欢迎的或非法使用的语言.。在那里工作的人们的行为和行为方面，语言的尊重更为明显。

新西兰基督城国际学院论文代写:法院行为

Courts are places of justice, where every single victim goes to expect and achieve justice to their innocence. Australia has a lot of courts and has a definite hierarchy that has to be followed by all courts. The highest court in Canberra is the High Court of Australia and there follows many state and territorial courts which has separate jurisdictions[ Find Law Australia, (2014) http://www.findlaw.com.au/faqs/1187/what-are-the-different-courts-in-australia-and-how.aspx]. Any lower court needs to follow the previous order of the court higher in hierarchy that itself, like the Local court would follow the decision of a Supreme Court which in turn will follow the decision of the High court. This is a personal reflection and personal observation paper which is being written after attending local and higher courts, along with presenting a detailed observation, themes of their conduct, and comparisons to relevant literature.
Personal Reflection and Observation
A country’s legal system is most adhered to by and at the courts. Courts are where the country’s legal system reflects and displays how effective the system of justice prevails. Courts and all their decision usually form an image of the legal system of a country and the subsequent belief and trust of people in the system. The courts thus have a great responsibility of maintaining people’s trust and confidence in the legal system of a country. Australia has a defined legal system where all courts attend different kinds of cases. The Magistrate courts generally ears summary of the criminal cases, and the most important cases are being heard in Higher Criminal courts of Australia.The Higher courts are the ones where major trails and decisions are being made.
My visit to the New South Wales District court was very exciting and the learning in self-experience was more than expected. The court is a beautiful country side designed building with a peaceful environment. The court has a good level of security outside as well as inside. Recently there has been greater responsibility taken especially for the safety of people who enter the court with a greater focus on risk management activities[ Rick Sarre and Alikki Vernon, ‘Access to Safe Justice in Australian Courts: Some Reflectionsupon Intelligence, Design and Process’ (2013) International Journal for Crime, Justice and Social Democracy, 2(2), p.133]. The people were formally dressed, especially the staff working at the court, with a few exceptions of casual dresses worn by visitors. The court had a list of cases and the respective court rooms in which the cases were heard out. The names of the judges were also mentioned. The staff spoke in a formal way and did not use unpopular or illegal language use in general chats. The respect of the language was much more and was evident in the actions and behaviours of the people working there.

新西兰NSIA国际酒店管理学论文代写：运营管理

在： ,

新西兰NSIA国际酒店管理学论文代写：运营管理

通过运营管理转换的输入,如劳动力、土地、资本等转化为输出像一般销售的商品和服务。在生菜收获系统中,同样的过程。员工的劳动而收获和使用土地,最终转化为服务地方的人的新鲜蔬菜(de Menezes等)。

根据市场的需求,制造商和供应商,生产的产品是销售(Cumberlidge)。无情的基本必要性组织努力最大化产品的质量可以帮助金融再生和完成客户的基本必需品。不用说,哈林顿说,随着时间的推移,通过提供客户优质的产品,一个组织可以在产品的需求上升。因此,更多的劳动力,深厚的知识和技术的应用、时间和投资是必要的。但保持所有的输入过程,组织需要监控所有这些事实和因素(Girling等)。一般输入似乎改变了在潜在的和特定的服务,输出,轴承,一个组织可以达到客户。但对于营销产品的需求是非常必要的,市场需要的环境有利于客户的产品或赞成。等其他辅助服务供应、技术支持和经济背景是需要适当的产品或服务。产品交付到市场后,指出Bruccoleri等人监控团队组织的需要仍然活跃在监督产品和评估战略设施产品的进一步发展。在图1中,变换的方法精确描绘。

 Through the operational management, the transformational inputs such as labour, land, capital and so forth are transformed to output like goods and services which are generally marketed. In the Lettuce harvesting system, same procedure is followed. The labour of the employees while harvesting and the usage of the land, ultimately transformed into the fresh vegetable that serves people in their places (de Menezes et al.).
In accordance with the demand of the market place, the manufacturers and the suppliers are needed to produce the products that are to be marketed (Cumberlidge). The basic necessity of the organisation is to strive relentlessly to maximize the quality of the product that may help in the financial regeneration and accomplishing the basic necessities of the customers. It is needless to say as Harrington has stated that with time by providing the quality products to the customers, an organisation can expect to rise up in demand of the product. Therefore, more labour, application of the profound knowledge and technology, time and investment is needed. But to maintain all the inputs for the very process, the organisation needs to monitor on all these facts and factors (Girling et al.). The general inputs are seemed to be transformed in the potential and specific service, the output, bearing which an organisation can reach to the customers. But for marketing a product the demand is very much necessary and the environment of the market place is needed to be in favor of the product or in favor of the customers as well. Other secondary services such as supply, technological support and economical background are needed to be proportionate with the very product or service. After the product is delivered to the market, as pointed out by Bruccoleri et al. the monitoring team of the organisation is needed to be remain active in supervising the product and assessing the strategical amenities for the further development of the product as well. In Figure 1, the method of transformation has been exquisitely portrayed.

新西兰Unitec理工学院代写：财务会计

在： ,

新西兰Unitec理工学院代写：财务会计

公司提出了改变股权的声明。那太明确所有项目的会计标准支付的股息，股本的公司所发行的。同时还介绍了综合收入和支出，部分，影响到公司的股权。
公司然后给资产负债表。公司正将资产和负债。在资产为流动资产和非资产和负债之间的区别也一样。它提到的所有项目由NZ会计标准要求。在所有的章节明确区分资产和负债的不同类型之间的。最后提到了公平。那太明确所有项目（菲舍尔佩克尔保健有限公司，2013）。
最后给出了现金流量表。在现金流量表中采用间接方法获得来自营运现金流。将现金流量分为三个部分，是经营活动的现金流量、筹资和投资现金流。在现金流的所有部分提供了所需的项目和金额。
公司对现金流的价值在网络的基础上，给出最终的现金流。自从公司从其他国家获得的现金流，因此需要提供外币现金流，这是可见的现金流量表，分别说明了外币现金流量。公司也表示，如在公司如折旧费用公司非现金交易。分红也形成一个需要显示该公司的现金流出。除此之外，公司表明，分别在子公司的投资，从公司的收入。
最后，公司的财务报表，有助于理解财务报表项目进行注释。这些笔记包含更多的信息关于金融项目中使用的财务报表，同时也给使用到财务报表中提到的价值的估计或假设（菲舍尔佩克尔保健有限公司，2013）。

新西兰Unitec理工学院代写：财务会计

Firm then presents the statement of changes of equity. In that too it clearly defines all the items required by the accounting standard like the dividends paid, share capital issued by the firm. It also presents the comprehensive income and expense in that section which affects the equity of the firm.

Firm then gives the balance sheet. Firm rightly classifies the assets and liabilities. In the assets it gives distinction between the current assets and the noncurrent assets and the also the same in liabilities. It mentions all the items required by the NZ accounting standard. In all the sections it clearly differentiates between the different types of assets and liabilities. Lastly it mentions the equity. In that too it clearly defines all the items (Fisher and Paykel Healthcare Limited, 2013).

Lastly it gives the cash flow statements. In the cash flow statement it uses the indirect method to obtain the cash flow from the operations. It divides the cash flow into three sections which are the cash flow operations, financing and also the investing cash flows. In all the sections of cash flow it has provided the required items and their amounts.

Firm gives the value of the cash flow on a net basis and gives the final cash flows. Since the firm receives cash flows from other nations and thus it needs to provide to foreign currency cash flows and this is visible in the cash flow statement where it separately shows the foreign currency cash flows. Firm also shows the non cash transactions of the firm which are shown as expense in the firm like depreciation. Dividends also form a cash outflow for the firm which needs to be shown. In addition to this firm shows separately the investment in subsidiaries and the income from the firms.

Lastly the firm gives the notes to the financial statements which help to understand the financial statement items. These notes contain more information about the financial items used in the financial statements and also it also gives the estimation or the assumptions used to arrive at the value mentioned in the financial statements (Fisher and Paykel Healthcare Limited, 2013).

新西兰圣海伦斯奥克兰商学院论文代写

在： ,

新西兰圣海伦斯奥克兰商学院论文代写：北京的空气污染能治好吗？

像玻璃熔化炉行业创造了氟化氢的排放到空气通过粘土，有时含有氟化物的能力。因此，如果选择含有少量氟化物成分的粘土作为原料，将控制氟化氢的排放过程.。也有一些为了保持电除尘器的除尘效率高，粉尘颗粒的电阻调节到所需的水平。不同的煤种混合，以减少硫的量存在于他们。这种原料管理可以实施，以降低整体杂质，危害大气（“空气污染控制”，1997）。
气中含有很多不同的污染物，包括挥发性有机化合物（VOC）是有机化合物，易挥发，有毒气体和其他气体，其中许多可以导致严重的健康损害，如对脑组织造成不良影响，甚至普通的突变或癌。这些通常控制的三种技术，即吸收，吸附，焚烧或燃烧的实施。这些技术，对温室气体的生产，以及可用于组合或奇异以及。吸收被定义为波运动的过程，在这个过程中能量可以从波传导到通过波的物质.。吸附是一种能力，固体颗粒必须吸引气体分子与表面接触.。焚烧是指将气态元素如VOC等有害气态碳氢化合物、水和二氧化碳化学通过快速氧化过程。还有四分之一个程序在发展，除了这三个，作为一个过程来调节二氧化碳的程度，被称为碳封存。这是一个长期储存的碳粒子在海洋，植物，土壤和地质构造，通常指存储这种碳原子有能力转换成二氧化碳气体，立即生效。这个过程可以通过人为的方式进行，这是人类活动，也可以自然发生。气候变化的某些方面，如大气中二氧化碳的增加已久的问题，本程序实现，通过地球工程学技术和改性利用土地，将确保在空气中的气体的存在将降低到所需的%。地球工程技术通常用于此目的包括碳捕获和存储（森，2014）。

新西兰圣海伦斯奥克兰商学院论文代写：北京的空气污染能治好吗？

Industries like glass melting furnace has the ability to create hydrogen fluoride emission into the air through the clay that sometimes contain certain fluorides. Thus if a type of clay which has minimum amount of fluoride components in it is chosen as a raw material, the hydrogen fluoride emission process will be controlled. There are also examples where in order to maintain the efficiency of electrostatic precipitators at high levels, the electrical resistance of dust particles was regulated to a desired level. Also different coal types are mixed in order to bring down the amount of sulfur present within them. This kind of management of raw materials can be implemented to bring down the overall impurity that harms the atmosphere (“Air Pollution Control”, 1997).

Gas contains a lot of diverse pollutants, including volatile organic compounds (VOC) that is organic compounds that readily evaporate, and various other gaseous air toxics, many of which can cause serious health damages like adverse effects on brain tissue and even generic mutations or cancer. These are generally controlled by the implementation of three techniques, namely, absorption, adsorption and incineration or combustion. These techniques, productive against greenhouse gases as well, can be used in combination or singularly as well. Absorption is defined as a procedure in wave motion, in which energy can be transferred from wave to matter that is travelling through the wave. Adsorption is an ability solid particles have to attract molecules of gases in contact with their surfaces. Incineration is referred to the process of converting gaseous elements like VOC’s and other harmful gaseous hydrocarbons to water and carbon dioxide chemically through rapid oxidation. There is also a fourth procedure in development, in addition to these three, as a process to regulate the degree of carbon dioxide, termed carbon sequestration. This is a long-term storage of carbon particles in the ocean, plants, soil and in geological formations, typically referring storage of such kind of carbons that have capabilities to convert to carbon dioxide gas with immediate effect. This procedure can be carried out through anthropogenic manner that is human activities, and can happen naturally as well. Certain aspects of climate change, like increment of carbon dioxide in the atmosphere has had been a concern for long, and implementation of this procedure, through geoengineering techniques and modified use of land, will ensure that the presence of the gas in the air will be decreased to the desired percent. The geoengineering techniques commonly in use for this purpose include carbon capture and storage (Nathanson, 2014).